 |
Clear Snow Guard Series Berger Clear Snow Guards are manufaactured in a crystal polycarbonate with U.V. stabilizers. The unique vent rib system allows for adhesive out gassing, which increases the shear and mechanical strength.The 3:1 base to blade ratio adds significantly to the shear and peel adhesion of the device to the surface. Superior engineering, along with the structured ribs, prevent common blade breakage. Snow Brakes Clear Snow Guards are also well suited for mechanical attachments and can be attached to any panel having a flat surface of as little as 3-1/2" wide. |
Structural Rib Surface Mount |
 |
RTMINI Clear Snow Guards Berger RTMINI Clear Snow Guards are manufactured in a high clarity polycarbonate plastic with U.V. stabilizers which provides strength and longevity. They have a low visibility and blend with roof materials. The RTMINI has a 1.5" wide base to fit parapet ribbed roof channels. They are manufactured with a 4.5" sq. holding area, a 2:1 base to blade ratio and a gusseted blade snow pocket that combine to effectively retain snow. They can be attached with adhesives, screws, or VHB tapes. The RTMINI features a blade "Snowflake" slot that accepts a metal color chip or custom emblem. |
Clear Code: RTMINI |
 |
RT Snow Guard Series Berger RT Snow Guards are non-penetrating devices which are secured to the standing seams of metal roofs utilizing stainless steel set screws to clamp them in place. They require no glues or sealants, and will not restrict thermal movement or contribute to unsightly oil-canning. RT Snow Guards are available in cast aluminum and cast bronze, and in two sizes to accommodate differing seam widths. They are particularly suited to double-lock and mechanically seamed metal roofing, and being traditional in design, they are ideal for restoration and preservation work. |
3/16" x 1" 9/32" x 1" |
 |
AP Snow Guard Series Berger AP Snow Guards are non-penetrating devices which have been engineered specifically for use with the more popular structural and non-structural preformed and architectural metal roof systems. They are secured the same as RT Snow Guards and are produced in cast aluminum. They are available in three different seam widths and heights. AP Snow Guards do not restrict thermal movement, and the deep throat permits it to be secured directly without damaging caps or compressing internal gasketing or sealant pockets. The wide, deep blade design makes it particularly effective in retaining snow with the higher seams and wider panel widths common in preformed architectural roofing. |
9/32" x 1" 3/8" x 1" 1/2" x 1 1/2" |
 |
SM Snow Guard Series Berger SM Surface Mount Snow Guards are manufactured of cast aluminum and are designed to be adhered to the pan surface of prefinished metal roofs using either a high strength construction adhesive or a combination of mechanical fasteners and an adhesive/sealant. They are particularly effective in retaining snow and ice on metal roofs where there are no suitable seams to which a seam mounted device can be fastened, including batten and lap seam panels, and other profiles having a flat surface of as little as 2 3/8" in width and space for a 5" blade. The SM Snow Guard is uniquely suited for use on trapezoidal type panels when coupled with the matching RT-300 Snow Guard. |
Surface Mount Code: SMMFSG, SMEASG, SMCASG |
 |
F-Rail Snow Retention System Accomodates up to 4 rails of protection. The only rail style snow fence available that functions BELOW the standing seams on metal roofs-helping to control the possibility of dangerous ice slides. Requires NO penetration of the roof. Receiver "pockets" make it an easy-to-install system. Easy to retrofit existing roofs. Available in mill finished aluminum or painted to match the roof. |
Mill Finished Aluminum Painted |
 |
E-Rail Snow Retention System Dual rail, low profile snow retention system. Stronger and lighter system that offers between the seam protection on metal roofs-helping to control the possibility of dangerous ice slides. Requires NO penetration of the roof and is easy-to-install. Available in mill finished aluminum or painted to match roof. Receptor slot for custom ornamental attachment. |
Mill Finished Aluminum Painted |
 |
S-Rail Snow Retention System Single rail, low profile snow retention system. Functions BELOW the standing seams on metal roofs-helping to control the possibility of dangerous ice slides. Requires NO penetration of the roof and is easy-to-install. Economical snow rail that's easy to retrofit to existing roofs. Available in mill finished aluminum or painted to match the roof. |
Mill Finished Aluminum Painted |
 |
Snow Retention System Components TBSS20 Tubing is available in 16 gauge stainless steel and is 20' x 1" square. |
Tubing End Caps Screws |