 |
No. 20 Snow Guards for Metal Corrugated Roof Surfaces Designed to fit 1 1/4" or 2 1/2" rounded corrugation. It is fastened with rivets to the panel or nailed through the roof into the structural member. It fits on top of the corrugation. |
Bronze Galvanized Malleable Iron |
 |
No. 2 Snow Guard Assembly for Slate Roofs (Heavy Duty) A durable, plated iron casting and bar assembly designed for slate roofs. The riveted steel bar is 1/8" x 1" x 12" long and goes 8" under the slate and between the slate course. It is normally installed with the slate roof application. Also suited for wood shake, tile, and mineral surfaced shingles. Excellent in areas that receive heavy snowfall. |
Bronze Galvanized Malleable Iron |
 |
No. 95 Snow Guard Assembly for Slate Roofs (Heavy Duty Ornamental) A larger guard with Gothic styling designed to transfer snow and ice loads more effectively to reduce cracking of the slate. This assembly is available in three material selections with 1/8" x 1" x 12" bar in appropriate metal combination. Excellent in areas that receive heavy snowfall. |
Bronze Aluminum G.M.I. |
 |
Loop the Loop Snow Guards for Asphalt Shingle, Slate, and Cedar Shake Roofs The Loop the Loop snow guard is an economy guard for wood deck applications under slate, wood shakes, or asphalt shingles. Recommended snow guards per square: 1/4 pitch roof-50 snow guards, 1/3 pitch roof-75 snow guards, 1/2 pitch roof-150 snow guards. |
Copper Code: SGLLC1 |
 |
Pro 100 Snow Guard Assembly for Slate and Asphalt Shingled Roofs This heavy duty snow guard is available for corrugated, flat, slate, and asphalt shingled roofs. The superior design of the Pro 100 includes a 1" gusset that reinforces the shoe, which makes this snow guard 5 times stronger than traditional residential snow guards. The Pro 100 has been tested to withstand a 300-pound point load at any location when applied to the gusset side of the shoe. Simply insert the slotted bar under the slate or shingle, engage a nail with one of the conveniently placed slots, and pull to fully secure the bar. This style snow guard provides fast installation and is ideal for existing or new construction applications with asphalt shingled roofs. |
Copper Stainless Steel |
 |
No. 100 Snow Guard Assembly for Slate and Asphalt Shingled Roofs This guard has eliminated the necessity of removing slate, avoiding the possibility of breakage. Simply insert the slotted bar under the slate or shingle, engage a nail with one of the conveniently placed slots and pull down to fully secure the bar. This style snow guard provides fast installation and is ideal for existing or new construction applications with asphalt shingled roofs. |
Copper Stainless Steel Galvanized Steel |
 |
No. 100 Snow Guards for Flat Metal Roof Surfaces Affordable protection for your gutter, foundation, or shrubbery. Ideal for mounting to corrugated or flat roof panels. Stainless steel offers no corrosion problems or stains and is suitable for paint to match your roof. The copper guard can be soldered or fastened to copper roof panels. These guards provide 8.75 sq. in. of stopping area. Holes for #8 screws or rivets. 1" x 2" flat mounting area. |
Copper Stainless Steel |
 |
No. 1 Snow Guards for Standing Seam The roofer's choice since 1883 for use on standing seam metal roofs. They are pinched to clamp on the top of the seam providing a rigid permanent job. |
Bronze Galvanized Malleable Iron |